We help the world growing since 2001

Galvanizing line for Steel Pipe

Short Description:

Hot-dip galvanizing is a popular method for steel product galvanizing, so that zinc can be strongly adhered on pipe outside and inside. After galvanizing, steel pipes are not easy oxidized and can serve longer time.   Production flow chart from black steel pipe to galvanized pipe is as follows : Derosination→Acid treatment→Water Cleaning→Applying impregnant→Drying→Zinc hot-dipping→ External blowing→internal blowing→Air cooling→Water cooling→Passivation→Drying→Marking on pipes→Inspection→Packi...


  • Min.Order Quantity: 1 Unit
  • Port: Tianjin
  • Payment Terms: L/C, T/T
  • Product Detail

    Product Tags

    Hot-dip galvanizing is a popular method for steel product galvanizing, so that zinc can be strongly adhered on pipe outside and inside. After galvanizing, steel pipes are not easy oxidized and can serve longer time.

     

    Production flow chart from black steel pipe to galvanized pipe is as follows :

    Derosination→Acid treatment→Water Cleaning→Applying impregnant→Drying→Zinc hot-dipping→ External blowing→internal blowing→Air cooling→Water cooling→Passivation→Drying→Marking on pipes→Inspection→Packing→Storage 

    Each step has a certain machine to match.

     

    Raw material Black steel pipe

    Length of Pipe: Usually 6 meters as pipe length, but according to buyer’s special need, we can make it 4 meters to 8 meters as Pipe length.

    Galvanizing way: Hot Dipped Galvanizing

    Zinc bath heating: Resistance heating or fuel heating

    Production Capacity (Example)

     

    The following table shows examples of the production rates for each size of B.S. Medium pipes.

       Norminal              Size Weight of Pipe  Production Capacity
        In    kg/m Kg/6.0m pcs./hr.approx kgs/hr.max
       1-1/2″    3.61  21.65     370    8000
       2″    5.1  30.6     260    8000
       3″    6.51  39.06     200    8000
       4″    12.1  72.6     110    8000
       5″    16.6  99.6      80    8000
       6″    19.7  118.2      68    8000
       8″    31.53  189.18      55    8000

     

    Note: 

    (1) For good use and maintance of Kettle, the speed should be set within 8000 kg/hr.

    (2) On this case, the tube length is set as 6 meters per pipe.

    (3) Above figures are based upon 100% full production.

    (4) Dipping time is a big factor when heavy coating is required. But if take a very long time dipping, the production efficency will be effected. Under the same working condition, zinc coating is depends on dipping time and steel chemical composition.

    Detailed discussion, pls send us message.

    Welcome to get the high quality hot-dip galvanizing mill for steel pipe size under 2 inch from us. We are one of the leading China manufacturers and suppliers of various manufacturing machines. Welcome to check the price list and the quotation with us.


  • Previous:
  • Next:

  • 
    WhatsApp Online Chat !